Parts & installation
Manufacturer documented- Vehicle
- Kyosho MINI-Z MR-04EVO2 W-MM 8500Kv Chassis Set32893
- Position
- center
- Change
- Add MZW712 steering and throttle gyro assistance
Parts needed
Sold packs for one vehicle| Part | Qty |
|---|---|
| MZW712Gyro Unit Set V2 for Mini-Z EVO | 1 |
Factory installation documented. Exact 32893 owner installation and quantified performance remain unverified.
Installation notes
- Scope is the 32893 W-MM/8500KV chassis set, whose maker page says the gyro is sold separately. Do not project this upgrade onto the 32893G set that includes a gyro.
- Buy one MZW712 set; the factory instructions identify one included 1.2 x 3.5 mm TP mounting screw. Retain the installed receiver and R/C unit.
- Remove the gyro cover and install the unit with the component-free side up; use the supplied mounting screw and route its connector as shown on page 48.
- The unit has standard preset settings. Adjustment through the transmitter requires compatible channel 3 and channel 4 functions; follow that transmitter manual.
- A compatible EVO/EVO2 receiver, matching transmitter, body, wheels/tires and chassis batteries are existing completion requirements for this chassis set. A gyro does not supply them.
- MZW711 for Readyset R/C Unit 2.1 is a different product. The factory also documents older MZW405 as an alternative, but it is not substituted for MZW712 in this recipe.
Sources
Kyosho MR-04EVO2 current instructions (opens in a new tab)
- Maker instructions and assembly diagrams for the stated parts and configuration.
Kyosho 32893 chassis set (opens in a new tab)
- Maker product information, applicable models and supporting parts.
Kyosho MZW712 (opens in a new tab)
- Maker product information, applicable models and supporting parts.