Motor service

Kyosho Fazer Mk2 FZ02L-BT Mad Van VE · 34491T1C

34491T1C Mad Van VE; mechanical guidance from maker-declared34491 series manual; exact ESC revision remains held

Start with the correct reference

The manual shows the motor cover, indexed pinion and wiring. Its standard22T pinion uses positionB;23T is marked for road use only, with a translation ambiguity retained for off-road limits.

Motor cover and motor installation, PDF pp. 30-31 (opens in a new tab)
Manufacturer procedure · 34491-T06,2024; maker-declared MAD VAN VE Series with KT231P+

Parts, tools and consumables

Listed in the reference

1.5mm hex wrenchtool
Requirement source, PDF p. 31 (opens in a new tab)
2.5mm hex wrenchtool
Requirement source, PDF p. 31 (opens in a new tab)

Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.

Setup specifications

Motor: KYOSHO SPEED HOUSE TORX 10EStock
Sources
Source 1: rc.kyosho.com (opens in a new tab)
Source 2: kyosho.com (opens in a new tab)
Source 3: rc.kyosho.com (opens in a new tab)
Source 4: rc.kyosho.com (opens in a new tab)
Stock motor shaft: 3.175 mmStock
Sources
Source 1: rc.kyosho.com (opens in a new tab)

Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.