Shock service

Start with the correct reference

Shock assembly and bleeding sequence. Follow this edition for cap design and front/rear configuration; no universal replacement basket is established.

• Shock assembly and bleeding, PDF p. 14 (opens in a new tab)

  Manufacturer procedure · Enduro Gatekeeper Builder's Kit 40110 manual

Parts, tools and consumables

Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.

Setup specifications

Shocks

Oil-filled threaded, aluminum body, 3 mm shaft, front and rearStock

Sources

• Source 1: img2c.associatedelectrics.com (opens in a new tab)
• Source 2: portal.associatedelectrics.com (opens in a new tab)

Shock bore

10 mm, front and rear; Nominal bore estimate from the OEM body size designation; internal diameter is not separately stated.Derived from replacement part

Sources

• Source 1: img2c.associatedelectrics.com (opens in a new tab)
• Source 2: portal.associatedelectrics.com (opens in a new tab)
• Source 3: img2c.associatedelectrics.com (opens in a new tab)

Spring, front

42089 Front Shock Spring, Gray, 1.49 lb/in, 63mmStock

Sources

• Source 1: img2c.associatedelectrics.com (opens in a new tab)

Spring, rear

42090 Rear Shock Spring, Blue, 2.09 lb/in, 63mmStock

Sources

• Source 1: img2c.associatedelectrics.com (opens in a new tab)

Front upper shock bolt

3 × 20 LP SHCS. Original #41091; fastener at this mount; not an internal shock-eye thread. mmStock

Sources

• Source 1: img2c.associatedelectrics.com (opens in a new tab)

Front lower shock bolt

3 × 14 BHCS. Original #25187; fastener at this mount; not an internal shock-eye thread. mmStock

Sources

• Source 1: img2c.associatedelectrics.com (opens in a new tab)

Rear upper shock bolt

3 × 20 LP SHCS. Original #41091; fastener at this mount; not an internal shock-eye thread. mmStock

Sources

• Source 1: img2c.associatedelectrics.com (opens in a new tab)

Rear lower shock bolt

3 × 14 BHCS. Original #25187; fastener at this mount; not an internal shock-eye thread. mmStock

Sources

• Source 1: img2c.associatedelectrics.com (opens in a new tab)

Shock oil, front

30 wtStockConvert fluid grade

Sources

• Source 1: img2c.associatedelectrics.com (opens in a new tab)
• Source 2: portal.associatedelectrics.com (opens in a new tab)

Shock oil, rear

30 wtStockConvert fluid grade

Sources

• Source 1: img2c.associatedelectrics.com (opens in a new tab)
• Source 2: portal.associatedelectrics.com (opens in a new tab)

Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.