No published motor KV: compare gearing by rollout.
Background
The TL4 Iron Bull is an assembled and painted 1/8 tractor with a two speed transmission. Its supplied motor, ESC, steering servo, lighting system and radio allow operation after adding a battery and charger. Cross RC also offers a matching T009 trailer and optional wheel weight and dual wheel kits. The tractor has a 336 mm wheelbase and a full size battery compartment, while its sound system is an optional addition. 1
Specifications
Last modified
17 specifications across 6 groups, covering stock setup, dimensions and components.
Spec
Value
Basis
Vehicle
Class
The kind of vehicle the maker sells it as. It sets what the car is built to do and which cars it is fair to compare it with.
Crawlers are built for slow, controlled climbing over rocks: very low gearing, flexible suspension and locked axles.
Build
Ready to run: built at the factory with the electronics installed.
Some come without a battery or charger; the maker's box contents say which.
Scale
The maker's nominal size compared with a full-size vehicle. It works more as a class label than a measurement.
A 1/10 monster truck is far bigger than a 1/10 touring car, so compare length and weight for real size.
This one is 594 mm long.
Part number
The maker's product number for this exact version.
A V2, a new color, or a kit instead of an RTR usually has a different number, and parts can differ between them.
Check it against your box or receipt before ordering parts.
Class
Crawler
Build
Ready to run
Scale
1/8
Part number
90100132
Drivetrain
Pinion
The small gear on the motor shaft. Fewer teeth gear the car shorter: quicker acceleration, lower top speed and a cooler motor. More teeth do the opposite.
It depends on the motor you fit, so the maker does not list one.
Spur
The large gear the pinion drives. A bigger spur with the same pinion gears the car shorter.
Pinion and spur must have the same pitch, or tooth size, to mesh.
Transmission & axle
Every reduction after the spur, multiplied together: transmission, transfer case and axle gears.
That chain is why a crawler's figure is much higher than other classes'.
It is fixed by the design; the gearing you change is the pinion and spur.
Final drive
How many times the motor turns for one turn of the wheels. A higher number is shorter gearing: more acceleration and pulling power, less top speed.
Crawlers run far higher ratios than other classes, so the truck can creep and hold on a climb.
Pinion
Not published
Spur
Not published
Transmission & axle
Not published
Final drive
Not published
Wheels & tires
Tire diameter
The outside diameter of the mounted tire, tread to tread. A taller tire covers more ground each turn, which gears the car taller.
Crawler wheels are named by rim size, such as 1.9 or 2.2 inches; that is the wheel, not this tire diameter.
Tire diameter
Not published
Power
Motor
Motor KV is the RPM a motor turns per volt with no load.
The maker does not publish it.
Battery
The highest LiPo cell count the maker rates the electronics for.
The maker does not publish it.
Battery space
The biggest pack that fits the tray, as the maker states it: length and width, and height where given.
Compare it with the pack's case size, not its capacity.
Allow room for the leads.
Motor
Not published
Battery
Not published
Battery space
155 × 44 × 35 mmmax pack, L × W × HStock
Stock
Performance
Theoretical top speed
It needs a motor KV, which this vehicle does not have on record, so no theoretical top speed is worked out.
Theoretical top speed
Not published
Size & weight
Length
Overall length as the maker states it, usually with the body fitted.
Useful for comparing real size, since scale labels are loose.
Width
Overall width as the maker states it, usually with the body fitted.
A wider car is more stable in corners and harder to roll over.
Height
Overall height as the maker states it, usually with the body fitted.
Useful when checking it fits a shelf, a bag or a car trunk.
Wheelbase
The distance between the front and rear axle centers. A longer wheelbase is steadier at speed and over bumps; a shorter one turns more tightly.
On a crawler it also decides how well the truck clears a ledge without the chassis catching.
Length
594 mm23.4 inStock
Stock
Width
310 mm12.2 inStock
Stock
Height
374 mm14.7 inStock
Stock
Wheelbase
336 mm13.2 inStock
Stock
How to read these figures
Stock is as the vehicle ships.
Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
Not published means it exists but no source we could find prints it.