Explore the catalog

VehiclesArrma Mojave 6S BLX V2Shock service

Maintenance reference

Shock service

Arrma Mojave 6S BLX V2 · ARA7604V2

Arrma Mojave 6S BLX V2, ARA7604V2; original equipment covered by the cited edition.

← Vehicle service reference

Start with the correct reference

Illustrated shock maintenance for this edition. Read the front and rear labels on the cited page before selecting fluid or hardware.

Parts, tools and consumables

Listed in the reference

Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.

Setup specifications

Shocks
Oil-filled threaded, aluminum body, 4 mm shaft, front and rearStock
Sources
Shock bore
16 mm, front and rearDerived from replacement part
Sources
Shock length, front
108 mm listed lengthCommunity
Sources
Shock length, rear
133 mm listed length; Jenny's RC lists the original Mojave V2 rear assembly at 133 mm eye to eye; extension state is unstated.Single report
Sources
Front upper shock bolt
3 × 28mm cap head (AR723328). Stock shock mounting hardware; a nearby camber, knuckle or chassis screw is a different position.Stock
Sources
Front lower shock bolt
3 × 21.5mm shock mount pin (AR330231). Stock dedicated shock mount pin; retain its shoulder and threaded-tip geometry.Stock
Sources
Rear upper shock bolt
3 × 28mm cap head (AR723328). Stock shock mounting hardware; a nearby camber, knuckle or chassis screw is a different position.Stock
Sources
Rear lower shock bolt
3 × 21.5mm shock mount pin (AR330231). Stock dedicated shock mount pin; retain its shoulder and threaded-tip geometry.Stock
Sources
Shock oil, front
550 cStStockConvert fluid grade
Sources
Shock oil, rear
550 cStStockConvert fluid grade
Sources

Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.