VehiclesArrma Kraton 6S EXB RollerShock service
Maintenance reference
Shock service
Arrma Kraton 6S EXB Roller · ARA106053
Arrma Kraton 6S EXB Roller, ARA106053; original equipment covered by the cited edition.
← Vehicle service referenceStart with the correct reference
Illustrated shock maintenance for this edition. Read the front and rear labels on the cited page before selecting fluid or hardware.
- Shock maintenance, PDF p. 15 (opens in a new tab)
Manufacturer procedure · ARA106053; ARA106053-Manual-MULTI.pdf
Parts, tools and consumables
Listed in the reference
- 5.5mm nut driver and 2mm hex drivertool
Tools shown in the shock-maintenance toolbar.
Requirement source, PDF p. 15 (opens in a new tab) - 1,000 cSt shock oil, front and rearconsumable
Manual baseline for the original shocks in this exact edition.
Requirement source, PDF p. 15 (opens in a new tab)
Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.
Setup specifications
- Shocks
- Oil-filled threaded, aluminum body, 4 mm shaft, front and rearStock
- Shock bore
- 16 mm, front and rearDerived from replacement part
- Shock length, front
- 117 mm listed length; Inferred from matching original damper components and the OEM service assembly's listed center-to-center length; the EXB roller was not measured.Derived from replacement part
- Shock length, rear
- 134 mm listed length; Inferred from matching original damper components and the OEM service assembly's listed center-to-center length; the EXB roller was not measured.Derived from replacement part
- Front upper shock bolt
- 3 × 28mm cap head (AR723328). Stock shock mounting hardware; a nearby camber, knuckle or chassis screw is a different position.Stock
- Front lower shock bolt
- 3 × 33mm shock mount pin (ARA713032). Stock dedicated shock mount pin; retain its shoulder and threaded-tip geometry.Stock
- Rear upper shock bolt
- 3 × 28mm cap head (AR723328). Stock shock mounting hardware; a nearby camber, knuckle or chassis screw is a different position.Stock
- Rear lower shock bolt
- 3 × 33mm shock mount pin (ARA713032). Stock dedicated shock mount pin; retain its shoulder and threaded-tip geometry.Stock
- Shock oil, front
- 1K cStStockConvert fluid grade
- Shock oil, rear
- 1K cStStockConvert fluid grade
Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.