VehiclesTraxxas Rustler 4X4 BL-2sShock service
Maintenance reference
Shock service
Traxxas Rustler 4X4 BL-2s · 67164-4
Traxxas Rustler 4X4 BL-2s, 67164-4; original configuration covered by this document.
← Vehicle service referenceStart with the correct reference
Shock oil and maintenance guidance for the original assemblies; not a complete rebuild procedure.
- Owner's manual, model 67164-4, PDF p. 23 (opens in a new tab)
Maintenance guidance · Traxxas 67164-4; cover-matched English edition 67164-4-om-en-r04.pdf
Parts, tools and consumables
Listed in the reference
- Silicone shock oilconsumableRequirement source, PDF p. 23 (opens in a new tab)
Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.
Setup specifications
- Shocks
- Oil-filled front and rearStock
- Shock bore, front
- 10 mm; Owner-reported approximate dimensions of the stock-listed 3760A assembly; length is mounting-hole center to center, not shaft travel.Single report
- Shock bore, rear
- 10 mm; Owner-reported approximate dimensions of the stock-listed 3762A assembly; length is mounting-hole center to center, not shaft travel.Single report
- Shock length, front
- 87 mm listed length; Owner-reported approximate dimensions of the stock-listed 3760A assembly; length is mounting-hole center to center, not shaft travel.Single report
- Shock length, rear
- 102 mm listed length; Owner-reported approximate dimensions of the stock-listed 3762A assembly; length is mounting-hole center to center, not shaft travel.Single report
- Shock stroke, front
- 20 mm; Approximate mounting-eye stroke, calculated as 87 - 67 mm from one owner's 3760A dimensions. This is shock assembly travel, not wheel travel; bumper and spring configuration were not specified.Single report
- Shock stroke, rear
- 27 mm; Approximate mounting-eye stroke, calculated as 102 - 75 mm from one owner's 3762A dimensions. This is shock assembly travel, not wheel travel; bumper and spring configuration were not specified.Single report
- Front upper shock bolt
- 3 × 15 mm button-head. Stock shock eye attachment.Stock
- Front lower shock bolt
- 3 × 15 mm button-head. Stock shock eye attachment.Stock
- Rear upper shock bolt
- 3 × 15 mm button-head. Stock shock eye attachment.Stock
- Rear lower shock bolt
- 3 × 15 mm button-head. Stock shock eye attachment.Stock
- Shock oil, front
- 60 wtStockConvert fluid grade
- Shock oil, rear
- 60 wtStockConvert fluid grade
Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.