VehiclesTeam Losi Racing TEN-SCTE 3.0Shock service
Maintenance reference
Shock service
Team Losi Racing TEN-SCTE 3.0 · TLR03008
TLR03008 electric assembly kit; owner-selected electronics
← Vehicle service referenceStart with the correct reference
Exact shaft, seal, piston and cap-bleed assembly. Kit oil settings are 40 wt front and 35 wt rear; inspect seals and worn shafts according to condition.
- Front and rear shock internal assembly, PDF p. 39 (opens in a new tab)
Assembly drawing · TLR03008 exact TEN-SCTE 3.0 multilingual assembly manual
An assembly drawing shows the components; it does not provide a complete service sequence. - Oil fill, bleed and springs, PDF p. 40 (opens in a new tab)
Assembly drawing · TLR03008 exact TEN-SCTE 3.0 multilingual assembly manual
An assembly drawing shows the components; it does not provide a complete service sequence.
Parts, tools and consumables
Listed in the reference
- 40 wt front and 35 wt rear silicone shock oilconsumable
Exact kit baseline.
Requirement source, PDF p. 40 (opens in a new tab) - Shock shaft and cap seals, inspect as neededpart
Source-listed assembly parts.
Requirement source, PDF p. 39 (opens in a new tab) - Black grease for shock collar sealconsumable
Apply only at depicted location.
Requirement source, PDF p. 40 (opens in a new tab)
Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.
Setup specifications
- Shocks
- Aluminum body 3.5 mm shaft, front and rearStock
- Shock oil, front
- 40 wtStockConvert fluid grade
- Shock oil, rear
- 35 wtStockConvert fluid grade
Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.