VehiclesTeam Losi Racing 8IGHT-X 2.0 (nitro)Shock service
Maintenance reference
Shock service
Team Losi Racing 8IGHT-X 2.0 (nitro) · TLR04012
TLR04012 nitro configuration of combined nitro/electric assembly kit; owner-supplied running equipment
← Vehicle service referenceStart with the correct reference
Exact seal, piston and cap-bleed assembly diagram. The diagram specifies 40 wt front and 35 wt rear oil. Keep front and rear bodies, shafts and springs separate.
- Shock seal, piston, cap and spring assembly, PDF pp. 15-17 (opens in a new tab)
Assembly drawing · TLR04012 exact 8IGHT-X/XE 2.0 combined manual, nitro branch
An assembly drawing shows the components; it does not provide a complete service sequence.
Parts, tools and consumables
Listed in the reference
- 40 wt front shock oilconsumable
Exact kit assembly baseline.
Requirement source, PDF p. 17 (opens in a new tab) - 35 wt rear shock oilconsumable
Exact kit assembly baseline.
Requirement source, PDF p. 17 (opens in a new tab)
Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.
Setup specifications
- Shocks
- Oil-filled aluminum body, emulsion, 3.5 mm shaft, front and rearStock
- Shock bore
- 16 mm, front and rear; Nominal 16 mm shock family from the original piston specification; piston outside diameter and bore clearance are not independently measured.Derived from replacement part
- Spring, front
- EVO 2 Spring Set FrStock
- Shock oil, front
- 40 wtStockConvert fluid grade
- Shock oil, rear
- 35 wtStockConvert fluid grade
Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.