VehiclesTeam Losi Racing 22X-4 EliteShock service
Maintenance reference
Shock service
Team Losi Racing 22X-4 Elite · TLR03026
TLR03026 electric assembly kit; owner-selected electronics
← Vehicle service referenceStart with the correct reference
Exact seals, 3 mm shafts and slow fill/bleed sequence. Clay/dirt kit baseline is 42.5 wt front and 40 wt rear, with separate spring cup and limiter settings.
- Seal, shaft, piston and bleed assembly, PDF pp. 15-16 (opens in a new tab)
Assembly drawing · TLR03026 exact 22X-4 Elite multilingual assembly manual
An assembly drawing shows the components; it does not provide a complete service sequence.
Parts, tools and consumables
Listed in the reference
- 42.5 wt front shock oilconsumable
Exact clay/dirt kit baseline.
Requirement source, PDF p. 16 (opens in a new tab) - 40 wt rear shock oilconsumable
Exact clay/dirt kit baseline.
Requirement source, PDF p. 16 (opens in a new tab)
Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.
Setup specifications
- Shocks
- Oil-filled big bore, 3 mm shaft, front and rearStock
- Shock bore
- 12 mm, front and rearStock
- Shock stroke, front
- 23 mm; Clay/dirt kit build with standard 0 mm eyelets; front 1 mm internal and 1 mm external limiters, rear no limiters.Stock
- Shock stroke, rear
- 30.5 mm; Clay/dirt kit build with standard 0 mm eyelets; front 1 mm internal and 1 mm external limiters, rear no limiters.Stock
- Spring, front
- Yellow Front Springs, Low Frequency, 12mmStock
- Spring, rear
- Pink Rear Springs, Low Frequency, 12mmStock
- Shock oil, front
- 42.5 wtStockConvert fluid grade
- Shock oil, rear
- 40 wtStockConvert fluid grade
Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.