VehiclesTeam Losi Racing 22SCT 3.0 MMShock service
Maintenance reference
Shock service
Team Losi Racing 22SCT 3.0 MM · TLR03009
TLR03009 electric assembly kit; owner-selected electronics
← Vehicle service referenceStart with the correct reference
Exact seals, shafts, pistons and bleed-cap assembly, with 32.5 wt oil at both ends in the kit setup. Inspect seals and worn parts as needed.
- Seal and shaft assembly, PDF pp. 39-40 (opens in a new tab)
Assembly drawing · TLR03009 exact 22SCT 3.0 multilingual assembly manual
An assembly drawing shows the components; it does not provide a complete service sequence. - Oil fill, cap bleed and spring assembly, PDF p. 41 (opens in a new tab)
Assembly drawing · TLR03009 exact 22SCT 3.0 multilingual assembly manual
An assembly drawing shows the components; it does not provide a complete service sequence. - Exact kit shock setup, PDF p. 55 (opens in a new tab)
Assembly drawing · TLR03009 exact 22SCT 3.0 multilingual assembly manual
An assembly drawing shows the components; it does not provide a complete service sequence.
Parts, tools and consumables
Listed in the reference
- 32.5 wt silicone shock oilconsumable
Exact kit baseline.
Requirement source, PDF p. 55 (opens in a new tab) - Shock seals, inspect as neededpart
Assembly listing, not a mandatory complete basket.
Requirement source, PDF p. 39 (opens in a new tab) - Black grease for collar sealconsumable
Apply only at depicted location.
Requirement source, PDF p. 41 (opens in a new tab)
Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.
Setup specifications
- Shocks
- Oil-filled threaded, aluminum body, big bore, 3.5 mm shaft, front and rear; Original assembly shaft diameter; 52/60.5 mm bare shafts are not complete shock lengths.Stock
- Shock bore
- 12 mm, front and rearStock
- Shock oil, front
- 32.5 wtStockConvert fluid grade
- Shock oil, rear
- 32.5 wtStockConvert fluid grade
Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.