VehiclesTeam Associated Rival MT10 V2Shock service
Maintenance reference
Shock service
Team Associated Rival MT10 V2 · 20518
Team Associated Rival MT10 V2, 20518; original equipment covered by the cited edition.
← Vehicle service referenceStart with the correct reference
Original shock assembly and a documented cap-bleeding sequence. This reference does not establish a complete removal, cleaning and fluid-change procedure.
- Shock assembly and oil filling, PDF p. 7 (opens in a new tab)
Manufacturer procedure · 20518-Rival-MT10-v2-Manual-1-2023.pdf
Parts, tools and consumables
Listed in the reference
- 40wt silicone shock fluid, front and rear (#5423)consumableRequirement source, PDF p. 7 (opens in a new tab)
- Shock seals and bladder, diagram setpart
Rival MT10 Shock Rebuild KitIllustration available on part page
Requirement source, PDF p. 7 (opens in a new tab)
Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.
Setup specifications
- Shocks
- Oil-filled threaded, 3 mm shaft, front and rearStock
- Shock bore
- 12 mm, front and rear; Nominal bore estimate from the OEM body size designation; internal diameter is not separately stated.Derived from replacement part
- Shock length, front
- 87.5 mm listed length; Working estimate from OEM aluminum replacement 25845 for the original 25825 hardware; eyelet centers. Not a factory-assembled shock measurement.Derived from replacement part
- Shock length, rear
- 102.1 mm listed length; Working estimate from OEM aluminum replacement 25846 for the original 25825 hardware; eyelet centers. Not a factory-assembled shock measurement.Derived from replacement part
- Shock stroke, front
- 26.9 mm; Working replacement travel: 87.5 minus 60.6 mm between eyelet centers. Not measured original-shock or wheel travel.Derived from replacement part
- Shock stroke, rear
- 34.5 mm; Working replacement travel: 102.1 minus 67.6 mm between eyelet centers. Not measured original-shock or wheel travel.Derived from replacement part
- Spring, front
- 4.00 lb/in, free length 63.00mmStock
- Spring, rear
- 3.95 lb/in, free length 75.00mmStock
- Front upper shock bolt
- 3 × 20. Buttonhead screw through the stock upper pivot ball; part25188. mmStock
- Front lower shock bolt
- 3 × 18. Buttonhead screw through the lower mount/shock guard; part2308. mmStock
- Rear upper shock bolt
- 3 × 20. Buttonhead screw through the stock upper pivot ball; part25188. mmStock
- Rear lower shock bolt
- 3 × 18. Buttonhead screw through the lower mount/shock guard; part2308. mmStock
- Front spring inner diameter
- 17.3. Exact stock spring set 25832; nominal component inner diameter, separate from shock bore and spring outer diameter. mmDerived from replacement part
- Rear spring inner diameter
- 17.3. Exact stock spring set 25832; nominal component inner diameter, separate from shock bore and spring outer diameter. mmDerived from replacement part
- Shock oil, front
- 40 wtStockConvert fluid grade
- Shock oil, rear
- 40 wtStockConvert fluid grade
Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.