VehiclesTeam Associated RC10L3 Touring Sport Kit

- Scale
- 1/10
- Drive
- 2WD
- Max LiPo
- -
- Power
- electric
Background
The RC10L3 Touring Sport used the rear-drive pan-car format with a composite chassis, bushings and a simpler shock arrangement than the graphite Team kit. Touring-car bodywork gave it a different appearance from an oval pan car while leaving the spur and differential mounted directly on the rear axle. Factory feature sheet (opens in a new tab)
Read moreShow less
Kit 8030 required the builder’s radio, motor, controller, battery, body and pinion. Its wheels and rear axle components need to match the particular hub arrangement, not a four-wheel-drive touring-car assumption. Measure the installed foam tires and inspect the rear-pod movement before setting rollout or changing suspension settings. Factory instructions (opens in a new tab)
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Touring | |
| Drive | 2WD | |
| Power | Motor not included | |
| Build | Kit | |
| Scale | 1/10 | |
| Part number | 8030 | |
| Drivetrain | ||
| ||
| Pinion | Not applicable | |
| Spur | 81TStock | Stock |
| Transmission & axle | 1.00:1Derived | Derived |
| Final drive | Not applicable | |
| Spur pitch | 48PStock | Stock |
| Wheels & tires | ||
| ||
| Tire diameter | Not published | |
| Suspension | ||
| ||
| Chassis | CompositeStock | Stock |
| Shocks, rear | Oil-filledOriginal rear VCS Macro damper.Stock | Stock |
| Spring, rear | Silver, #6496Original VCS Macro damper spring; spring rate is not stated on this page.Stock | Stock |
| Shock oil, rear | 30 wtStock | Stock |
| Power | ||
| ||
| Motor | Not applicable | |
| Battery | Not published | |
| ESC mounting method | Servo tape #6726Manual installation method for a separately supplied ESC; the kit does not include an ESC.Stock | Stock |
| Performance | ||
| ||
| Theoretical top speed | Not applicable | |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Derived uses recorded dimensions or arithmetic. The row explains the inference. A nominal mating size is not a measured tolerance or a complete fitment guarantee.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit.
- Not published means it exists but no source we could find prints it.
Build and setup
Factory setup guide for this configuration.
Start by checking that the steering, suspension and drivetrain move freely. Match the chassis, axle and shock components to this package before replacing them. Establish ride height and the fitted tire diameter, then record one setup change at a time. A motor-dependent gear recommendation or an example setup sheet should not be treated as the equipment supplied with every kit.[1] RC10L3 Touring Sport Kit factory assembly and setup instructions (opens in a new tab)
OEM parts
Drivetrain
61/8 X 5/16 UNFLANGED BEARING
FACTORY TEAM Graphite rear axle, new thru-axle design
DIFF DRIVE RING
1/8” DIFF BALLS
81 TOOTH, 48 PITCH SPUR/DIFF GEAR (kit std.)
Suspension
13VCS MICRO SHOCK KIT
VCS MICRO SHOCK BODY, ALUMINUM
VCS MICRO SHOCK SHAFT W/PISTON
VCS MICRO SHOCK REBUILD KIT
VCS MICRO SHOCK SHAFT END, ALUMINUM
.71” STROKE SHOCK SHAFT
UPPER SUSPENSION ARM
UPPER SUSPENSION ARM MOUNT
Steering
1OFFSET STEERING BLOCK
Electronics
1MOTOR BULKHEAD, ALUMINUM
Wheels & tires
4ASSOCIATED FRONT WHEEL, NATURAL
ASSOCIATED FRONT WHEEL, BLACK
RIGHT WHEEL HUB
FACTORY TEAM Blue aluminum right wheel hub
Hardware & seals
2HINGE PIN, UPPER ARM w/caster shims
SERVO MOUNT, W/SCREWS
Unclassified
3DAMPENER SPRINGS
T-BAR SPACER, MOLDED
LEFT REAR BULKHEAD, MOLDED
30 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
About these specs
Identify the installed equipment on a restored vehicle before ordering replacements.
Sources
3 source links for this model.
Read moreShow less
- Manuals.
- Individual part and electronics specifications.
Links open in a new tab.
Maker documents
1- RC10L3 Touring Sport Kit factory instructions (opens in a new tab)Supports 5 specificationsUsed forMain specsGearingFluidsSuspensionPowerBackground
Parts and electronics
2- Factory feature sheet (opens in a new tab)Supports 1 specificationUsed forMain specsBackground
- Spur gear 81T 48P (opens in a new tab)Supports 1 specificationUsed forGearing
