Maintenance reference

Shock service

Tamiya TT-02B · Plasma Edge II Iridescent Body · Kit 47454

Exact kit 47454, manufacturer-linked TT-02B edition; factory CVA dampers, bevel differentials, plastic/metal bearings and Type 540 motor. Body hardware separate.

← Vehicle service reference

Start with the correct reference

Factory CVA front/rear damper assembly, #400 oil and air removal. Black 3mm MB15 O-rings; front MB9 green and rear MB10 red oil seals. Source-listed consumables, no mandatory basket.

Exact manufacturer-linked TT-02B chassis assembly, PDF pp. 11-13 (opens in a new tab)
Assembly drawing · R/C TT-02B Chassis (11053619)
An assembly drawing shows the components; it does not provide a complete service sequence.

Parts, tools and consumables

Listed in the reference

Damper oil #400consumable
When reassembling factory CVA dampers; replace seals as needed, no mandatory replacement asserted.
Requirement source, PDF p. 12 (opens in a new tab)
Black 3mm damper O-ring MB15consumable
When reassembling factory CVA dampers; replace seals as needed, no mandatory replacement asserted.
Requirement source, PDF p. 13 (opens in a new tab)
Front oil seal MB9, greenconsumable
When reassembling factory CVA dampers; replace seals as needed, no mandatory replacement asserted.
Requirement source, PDF p. 12 (opens in a new tab)
Rear oil seal MB10, redconsumable
When reassembling factory CVA dampers; replace seals as needed, no mandatory replacement asserted.
Requirement source, PDF p. 13 (opens in a new tab)

Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.