Servo service

Tamiya TT-02 Type-SRX Chassis Kit · 58720

Tamiya TT-02 Type-SRX Chassis Kit, kit 58720; radio and servo installation depends on separately chosen equipment.

Start with the correct reference

Kit installation reference for the chosen servo and horn. Follow the brand-specific horn and fastener callouts; the kit reference does not identify a supplied servo.

Servo assembly and neutral position, PDF p. 16 (opens in a new tab)
Assembly drawing · 58720.pdf
An assembly drawing shows the components; it does not provide a complete service sequence.

Parts, tools and consumables

Required by the instructions

Center the servo before attaching the saver or hornprerequisite
Requirement source, PDF p. 16 (opens in a new tab)

Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.

Setup specifications

Servo mounting space: 48 across mounts; below flange 15 to 30; above flange 12 to 16. Maker suitable-servo diagram; not a case dimension or hole-center pattern. Product page recommends a low-profile servo. mmStock
Sources
Source 1: d7z22c0gz59ng.cloudfront.net (opens in a new tab)

Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.