VehiclesTamiya TL-01
- Scale
- 1/10
- Drive
- 4WD
- Max LiPo
- -
- Power
- -
Background
TL-01 is Tamiya's shaft-driven four-wheel-drive touring chassis built around a tall enclosed monocoque frame. The manufacturer's Ferrari 360 Modena Challenge instructions identify kit 58289 and show the characteristic compact drivetrain, double-wishbone suspension and coil-spring dampers. Factory reference (opens in a new tab).
Read moreShow less
The chassis carried different licensed bodies, so the complete kit number matters for the shell, wheels, tires and supplied equipment. The Ferrari manual shows a Type 540 motor and calls for the radio, controller and battery separately. Those details describe that numbered build rather than every TL-01 package. Factory reference (opens in a new tab).
A used TL-01 benefits from a mechanical baseline before more power is added. Inspect the enclosed gears, shaft joints, steering and suspension for wear or binding, and check whether the original plastic and metal bearing locations have already been changed. Keep the actual tire and pinion specification with the body kit when calculating speed or looking for replacement parts. Factory reference (opens in a new tab).
Kits on this chassis Built on the TL-01
Each kit adds its own body, tires, pinion and motor. The chassis figures below apply to all of them.
Read moreShow less
| Kit | Part no. | Maker page |
|---|---|---|
| Ferrari 360 Modena Challenge | 58289 | d7z22c0gz59ng.cloudfront.netPage (opens in a new tab) |
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Touring | |
| Drive | 4WD | |
| Build | Kit | |
| Scale | 1/10 | |
| Drivetrain | ||
| ||
| Pinion | With each kit | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | With each kit | |
| Wheels & tires | ||
| ||
| Tire diameter | With each kit | |
| Power | ||
| ||
| Motor | With each kit | |
| Battery | With each kit | |
How to read these figures
- Chassis figures are shared references. Motors, electronics and supplied extras depend on the exact numbered kit.
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not published means it exists but no source we could find prints it.
- With each kit means each kit on this chassis brings its own, so enter yours in the gearing tool.
Build and setup
Factory setup guide for this configuration.
Use the Ferrari 360Modena Challenge 58289 instructions for that kit's stock parts and equipment. Other TL-01 bodies and later L Avariants can have different suspension or running gear. Establish the exact version before ordering a replacement shell or a bearing set.[1] Exact factory assembly and setup manual (opens in a new tab)
Check the enclosed drivetrain for free rotation before fitting electronics. Inspect the shaft joints and suspension pins and center the steering servo before setting the linkage. The friction-damper assembly is the starting point for this kit; an oil-damper installation needs its own exact parts and mounting instructions.[1] Exact factory assembly and setup manual (opens in a new tab)
OEM parts
Suspension
1Hardware & seals
12.6x10mm Tapping Screw
Unclassified
2TL01 B Parts (Upright)
TL01 G Parts
4 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
About these specs
Exact numbered assembly kit.
Read moreShow less
- Radio and ESC are separate purchases; the kit has no universal maximum LiPo cell rating.
- Unknown tooth counts or dimensions are not borrowed from another edition.
Sources
1 source link for this model.
Read moreShow less
- Manuals and parts lists.
Links open in a new tab.
Maker documents
1- TL-01 assembly manual (Tamiya PDF) (opens in a new tab)Supports 1 specificationparts list Exact 58289 edition; service-card references only.Used forMain specsBackground
