VehiclesTamiya M-01
- Scale
- 1/10
- Drive
- 2WD
- Max LiPo
- -
- Power
- -
Background
M-01 established Tamiya's small front-wheel-drive chassis format with a front-mounted motor and compact body proportions. The factory Rover Mini Cooper instructions identify kit 58149 and show independent double-wishbone suspension, coil-spring shocks and a Type 540 motor. Factory reference (opens in a new tab).
Read moreShow less
The layout makes a small road-car build mechanically distinct from a full-width four-wheel-drive touring car. Its gearbox, suspension and steering remain accessible through the assembly drawings, with separate references for the Mini body and chassis parts. A different body or a later M-chassis name does not automatically identify the same wheelbase or mounting arrangement. Factory reference (opens in a new tab).
When restoring an M-01, inspect the front drive shafts, differential, bearing surfaces and steering joints before selecting electronics. The instructions show period radio and controller arrangements, so choose any replacement system as a complete installation. Keep the actual kit's wheels, tires and gearing together rather than transferring measurements from the M-03, M-05 or another compact chassis. Factory reference (opens in a new tab).
Kits on this chassis Built on the M-01
Each kit adds its own body, tires, pinion and motor. The chassis figures below apply to all of them.
Read moreShow less
| Kit | Part no. | Maker page |
|---|---|---|
| Rover Mini Cooper | 58149 | d7z22c0gz59ng.cloudfront.netPage (opens in a new tab) |
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Touring | |
| Drive | 2WD | |
| Build | Kit | |
| Scale | 1/10 | |
| Drivetrain | ||
| ||
| Pinion | With each kit | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | With each kit | |
| Wheels & tires | ||
| ||
| Tire diameter | With each kit | |
| Power | ||
| ||
| Motor | With each kit | |
| Battery | With each kit | |
How to read these figures
- Chassis figures are shared references. Motors, electronics and supplied extras depend on the exact numbered kit.
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not published means it exists but no source we could find prints it.
- With each kit means each kit on this chassis brings its own, so enter yours in the gearing tool.
Build and setup
Factory setup guide for this configuration.
Use kit 58149 as the service reference for the Rover Mini build. Inspect the front gearbox and drive-shaft joints and center the servo before setting the linkage. Check the installed bearing locations rather than assuming a used car remains in its original specification.[1] Exact factory assembly and setup manual (opens in a new tab)
Choose a controller, battery and motor installation together. The period manual's nominal battery voltage does not establish a modern Li Po cell limit. Confirm the fitted body, tire size and wheelbase before replacing parts from a later M-chassis list.[1] Exact factory assembly and setup manual (opens in a new tab)
OEM parts
Drivetrain
5Drive Shaft
Differential Bevel Gear Set
20T, 21T AV Pinion Gear Set
Gearbox Joint
Electronics
1Motor
Wheels & tires
4Mini Cooper Wheel
M-Chassis Radial Tire
Front Wheel Axle
Rear Wheel Axle
Chassis & body
2Body
M-Chassis Inner Sponge
Unclassified
8A Parts
B Parts
C Parts
D Parts
H Parts
J Parts
P Parts
Coil Spring
20 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
About these specs
Exact numbered assembly kit.
Read moreShow less
- Radio and ESC are separate purchases; the kit has no universal maximum LiPo cell rating.
- Unknown tooth counts or dimensions are not borrowed from another edition.
Sources
1 source link for this model.
Read moreShow less
- Manuals and parts lists.
Links open in a new tab.
Maker documents
1- M-01 assembly manual (Tamiya PDF) (opens in a new tab)Supports 1 specificationparts list Exact 58149 edition; service-card references only.Used forMain specsBackground
