Shock service

Start with the correct reference

Use the OEM damper assembly and filling instructions. Match the front and rear components and inspect seals before rebuilding.

• SRX8e Gen4 damper assembly, PDF pp. 32-33 (opens in a new tab)

  Manufacturer procedure · SRX8e Gen4 SER600025

  Find the physical PDF page in the linked viewer.

Parts, tools and consumables

Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.

Setup specifications

Shocks, front

Oil-filled threaded, aluminum body, 3.5 mm shaft; Derived from the identical OEM shaft 600800, listed in this kit and the SRX8-E Pro 1/8 4wd kit.Derived from replacement part

Sources

• Source 1: serpent.com (opens in a new tab)
• Source 2: serpent.com (opens in a new tab)
• Source 3: asia.serpent.com (opens in a new tab)
• Source 4: asia.serpent.com (opens in a new tab)
• Source 5: serpent.com (opens in a new tab)

Shocks, rear

Oil-filled threaded, aluminum body, 3.5 mm shaft; Derived from the identical OEM shaft 600801, listed in this kit and the SRX8-E Pro 1/8 4wd kit.Derived from replacement part

Sources

• Source 1: serpent.com (opens in a new tab)
• Source 2: serpent.com (opens in a new tab)
• Source 3: asia.serpent.com (opens in a new tab)
• Source 4: asia.serpent.com (opens in a new tab)
• Source 5: serpent.com (opens in a new tab)

Spring, front

67.50mm; pink 4.9lbs (600856)Stock

Sources

• Source 1: serpent.com (opens in a new tab)
• Source 2: serpent.com (opens in a new tab)

Spring, rear

82.50mm; purple 3.8lbs (600865)Stock

Sources

• Source 1: serpent.com (opens in a new tab)
• Source 2: serpent.com (opens in a new tab)

Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.