Shock service

Start with the correct reference

Open the cited manufacturer reference for the assembly, sequence and checks. Replacement needs depend on inspection and the fitted components.

• Shock cleaning, PDF p. 8 (opens in a new tab)

  Manufacturer procedure · LOS01026_MANUAL_EN.pdf

• Mini LMT rebuild parts, PDF p. 13 (opens in a new tab)

  Parts reference · LOS01026_MANUAL_EN.pdf

Parts, tools and consumables

Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.

Setup specifications

Shocks

Oil-filled front and rearStock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Shock length

65 mm listed length, front and rear; Crawford lists 65 mm eye-to-eye for original take-off shocks; the listing does not explicitly define extension state.Single report

Sources

• Source 1: teamcpe.com (opens in a new tab)
• Source 2: horizonhobby.com (opens in a new tab)

Spring, front

Soft (Yellow), LOS213015Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Spring, rear

Med (Blue), LOS213016Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Front lower shock bolt

M2 × 12mm buttonhead (TLR5914). Exact LOS01026T1; through stock lower shock mounting ballStock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Rear lower shock bolt

M2 × 12mm buttonhead (TLR5914). Exact LOS01026T1; through stock lower shock mounting ballStock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Front upper shock mount

Upper cap clamp (LOS211044). Original factory assembly; the cap is captured by the split mount. Mount-to-chassis screws are separate from a through-eye shock bolt.Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Rear upper shock mount

Upper cap clamp (LOS211044). Original factory assembly; the cap is captured by the split mount. Mount-to-chassis screws are separate from a through-eye shock bolt.Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Shock oil, front

17.5 wtStockConvert fluid grade

Sources

• Source 1: horizonhobby.com (opens in a new tab)
• Source 2: horizonhobby.com (opens in a new tab)

Shock oil, rear

17.5 wtStockConvert fluid grade

Sources

• Source 1: horizonhobby.com (opens in a new tab)
• Source 2: horizonhobby.com (opens in a new tab)

Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.