Adjustable camber and steering links

Parts & installation

Manufacturer documented

Vehicle: Losi Micro-TLOS-1392
Position: front / rear
Change: Replace fixed camber and steering links with threaded steel turnbuckles and supplied rod ends.

One sold package per listed quantity

Part	Qty
LOS-1990Adjustable turnbuckle set with camber and steering rod ends	1

Losi offers LOS-1990 for the modern LOS-1392 Micro-T as a component option. The original 1/36 Micro-T is outside this application.

For LOS-1392 only. Current Micro-T LOS-1392 is distinct from the original 1/36 Micro-T LOSB0230.
Use one LOS-1990 set, including threaded turnbuckles and rod ends for camber and steering. Retain original ball studs, steering assembly, hubs, arms and their fasteners; replace worn studs as service work.
Before removal, record each original link length and orientation. Match those lengths as the initial setting, then adjust camber and front toe evenly. Check free movement through full steering and suspension travel. These are installation checks, not a verified optimum geometry.
Retain stock motor, ESC/receiver, transmitter, servo, battery, charger, gearing and wheels. No wiring change or chassis cutting is specified by the factory listing.
This is a component option that adds adjustment, not a brushless, differential or chassis conversion. Oil-filled shocks are already fitted and are not an added feature of this link set.

One LOS-1990 set supplies adjustable links and rod ends. Camber/toe adjustment does not guarantee a handling gain.

The modern LOS-1392 Micro-T option table lists LOS-1990. It is separate from the original 1/36 Micro-T.