Shock service

Start with the correct reference

Open the cited manufacturer reference for the assembly, sequence and checks. Replacement needs depend on inspection and the fitted components.

• Shock disassembly, cleaning and bleeding, PDF p. 9 (opens in a new tab)

  Manufacturer procedure · LOS04021-Manual-EN.pdf

• Replacement parts, PDF p. 14 (opens in a new tab)

  Parts reference · LOS04021-Manual-EN.pdf

Parts, tools and consumables

Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.

Setup specifications

Shocks

Oil-filled aluminum body, front and rearStock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Shock length

130 mm listed length, front and rearAftermarket spec

Sources

• Source 1: teamprp.bigcartel.com (opens in a new tab)

Spring, front

Yellow 1.1 rate (LOS243016)Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Spring, rear

Blue 1.6 rate (LOS243017)Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Front upper shock mount

Upper cap clamp (LOS244007). Original factory assembly; the cap is captured by the split mount. Mount-to-chassis screws are separate from a through-eye shock bolt.Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Rear upper shock mount

Upper cap clamp (LOS244007). Original factory assembly; the cap is captured by the split mount. Mount-to-chassis screws are separate from a through-eye shock bolt.Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Shock oil, front

25 wtStockConvert fluid grade

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Shock oil, rear

25 wtStockConvert fluid grade

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.