Search Arrma Vorteks 223S BLX DSC 2WD

Explore the catalog

VehiclesArrma Vorteks 223S BLX DSC 2WDUpgrades17mm threaded-axle wheel hexes

17mm threaded-axle wheel hexes

Arrma Vorteks 223S BLX DSC 2WD · ARA3505

This changes the wheel mounting interface to 17mm hex so you can use compatible 17mm wheels. It opens up a different wheel-and-tire choice, but the finished width, tire clearance and effective gearing still need checking.

← Back to vehicle upgrades

Parts & installation

Manufacturer documented
Vehicle
Arrma Vorteks 223S BLX DSC 2WDARA3505
Position
front / rear
Change
Change the 2WD threaded-axle wheel interface to 17mm hex

Parts needed

One sold kit; see the route for assembly coverage
PartQty
ARA-3150ARRMA 17mm Wheel Hex Conversion for Threaded Axles (+10mm Offset)1

ARRMA documents this option for this edition. Check the installed parts before ordering.

Installation notes

  • ARA-3150 is the threaded-axle 17mm conversion set for this 2WD platform. The supplied adapters change the wheel interface; they are not the older 4X2 BOOST-to-4WD kit.
  • Compatible 17mm wheels and tires are separate. The package is described with +10mm offset, so check the finished track, hub engagement and body/suspension clearance.
  • A larger tire changes effective gearing. Confirm diameter and wheel offset, check motor temperature and adjust gearing when needed.
  • Use the kit contents and instructions for the actual threaded axle. Do not substitute individual axle hardware from an unrelated 17mm conversion.

Sources

ARRMA 17mm Wheel Hex Conversion for Threaded Axles (+10mm Offset)
  • Complete threaded-axle 17mm hex conversion set, described with +10mm offset, for the named 2WD platform.