VehiclesArrma Typhon 3S BLXESC calibration
Maintenance reference
ESC calibration
Arrma Typhon 3S BLX · ARA4306V3
Arrma Typhon 3S BLX, ARA4306V3; original equipment in the exact shared maker edition.
← Vehicle service referenceStart with the correct reference
Open the cited manufacturer reference for the assembly, sequence and checks. Replacement needs depend on inspection and the fitted components.
- Original ESC throttle calibration, PDF p. 15 (opens in a new tab)
Manufacturer procedure · ARA4306V3; ARA4312V3-manual-multi.pdf
ARRMA BLX100, 3S V3: calibration
Original ARRMA BLX100 AR390069 in the explicitly listed ARA4302V3, ARA4303V3, ARA4312V3 and ARA4306V3 editions.
Before starting
- Confirm that the vehicle still has the controller covered by this exact manual edition.
- Raise the wheels clear of the ground when checking the radio equipment. Use a fully charged compatible LiPo battery.
Calibration sequence
- With the ESC off, connect the batteries and switch on the transmitter.
- Hold the SET button while switching on the ESC. Release SET when the red ESC LED starts flashing.
- Leave the trigger at neutral and press SET. Confirm one green flash.
- Hold full forward throttle and press SET. Confirm two green flashes.
- Hold full brake and press SET. Confirm three green flashes.
- Switch off the ESC to finish the setup.
Final checks
- Return the trigger to neutral before switching on for use.
Parts, tools and consumables
No separate parts or tools are listed here. Check the cited instructions for consumables, tools and replacement decisions.
Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.
Setup specifications
- ESC
- ARRMA BLX100Stock
- ESC mounting dimensions
- 43 × 54.5 × 34. Original BLX100 envelope, including hold-down tabs in the width. Mounting-hole spacing and available chassis clearance are separate. mm (L × W × H)Stock
- ESC motor connector
- 4 mm bullet. Original BLX100 motor-side bullets; battery EC5 connector is separate.Stock
- Battery connector
- IC5Stock
Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.