VehiclesArrma Notorious 6S BLX V6Shock service
Maintenance reference
Shock service
Arrma Notorious 6S BLX V6 · ARA8611V6
Arrma Notorious 6S BLX V6, ARA8611V6; original equipment covered by the cited edition.
← Vehicle service referenceStart with the correct reference
Illustrated shock maintenance for this edition. Read the front and rear labels on the cited page before selecting fluid or hardware.
- Shock maintenance, PDF p. 21 (opens in a new tab)
Manufacturer procedure · ARA8611V6; ARA8611V6-MANUAL-ML.pdf
Parts, tools and consumables
Listed in the reference
- 5.5mm nut driver and 2mm hex drivertool
Tools shown in the shock-maintenance toolbar.
Requirement source, PDF p. 21 (opens in a new tab) - 1,300 cSt shock oil, front and rearconsumable
Manual baseline for the original shocks in this exact edition.
Requirement source, PDF p. 21 (opens in a new tab)
Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.
Setup specifications
- Shocks
- Oil-filled aluminum body, emulsion, 4 mm shaft, front and rearStock
- Shock bore
- 16 mm, front and rearStock
- Shock length, front
- 117 mm listed lengthStock
- Shock length, rear
- 134 mm listed lengthStock
- Front lower shock bolt
- 3 × 33mm shock mount pin (ARA713032). Stock dedicated shock mount pin; retain its shoulder and threaded-tip geometry.Stock
- Rear lower shock bolt
- 3 × 33mm shock mount pin (ARA713032). Stock dedicated shock mount pin; retain its shoulder and threaded-tip geometry.Stock
- Front upper shock mount
- M4 standoff ARA330816; AR708001 nut. Stock standoff/nut assembly. A separate ordinary upper-bolt length is not established.Stock
- Rear upper shock mount
- M4 standoff ARA330816; AR708001 nut. Stock standoff/nut assembly. A separate ordinary upper-bolt length is not established.Stock
- Shock oil, front
- 1,300 cStStockConvert fluid grade
- Shock oil, rear
- 1,300 cStStockConvert fluid grade
Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.