Shock service

Start with the correct reference

Illustrated shock maintenance for this edition. Read the front and rear labels on the cited page before selecting fluid or hardware.

• Shock maintenance, PDF p. 21 (opens in a new tab)

  Manufacturer procedure · ARA8608V5; ARRMA-6SV5-Manual-MULTI.pdf

Parts, tools and consumables

Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.

Setup specifications

Shocks

Oil-filled aluminum body, 4 mm shaft, front and rearStock

Sources

• Source 1: horizonhobby.com (opens in a new tab)
• Source 2: horizonhobby.com (opens in a new tab)
• Source 3: amainhobbies.com (opens in a new tab)
• Source 4: horizonhobby.com (opens in a new tab)
• Source 5: horizonhobby.com (opens in a new tab)
• Source 6: horizonhobby.com (opens in a new tab)
• Source 7: horizonhobby.com (opens in a new tab)

Shock bore

16 mm, front and rearStock

Sources

• Source 1: horizonhobby.com (opens in a new tab)
• Source 2: horizonhobby.com (opens in a new tab)
• Source 3: horizonhobby.com (opens in a new tab)

Shock length, front

117 mm listed lengthSingle report

Sources

• Source 1: powerhobby.com (opens in a new tab)
• Source 2: horizonhobby.com (opens in a new tab)

Shock length, rear

134 mm listed lengthStock

Sources

• Source 1: horizonhobby.com (opens in a new tab)
• Source 2: horizonhobby.com (opens in a new tab)

Spring, front

Spring rate: 6.2lbs/in (1.09N/mm)Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Spring, rear

Spring rate: 5.0lbs/in (0.87N/mm)Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Front upper shock bolt

3 × 28mm cap head (AR723328). Stock shock mounting hardware; a nearby camber, knuckle or chassis screw is a different position.Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)
• Source 2: rc4max.com (opens in a new tab)

Front lower shock bolt

3 × 33mm shock mount pin (ARA713032). Stock dedicated shock mount pin; retain its shoulder and threaded-tip geometry.Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)
• Source 2: horizonhobby.com (opens in a new tab)

Rear upper shock bolt

3 × 28mm cap head (AR723328). Stock shock mounting hardware; a nearby camber, knuckle or chassis screw is a different position.Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)
• Source 2: rc4max.com (opens in a new tab)

Rear lower shock bolt

3 × 33mm shock mount pin (ARA713032). Stock dedicated shock mount pin; retain its shoulder and threaded-tip geometry.Stock

Sources

• Source 1: horizonhobby.com (opens in a new tab)
• Source 2: horizonhobby.com (opens in a new tab)

Shock oil, front

1K cStStockConvert fluid grade

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Shock oil, rear

1K cStStockConvert fluid grade

Sources

• Source 1: horizonhobby.com (opens in a new tab)

Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.