SB-2272MG+

Part numberSB-2272MGP

Specifications

Line: ORIGINAL LINE
Application: CAR / HELI;AIRPLANE
Servo Size: Standard
Operating Voltage: 6.0V-8.4V
Amplifier Type: Digital Controller
Motor Type: Original Brushless
Case Type: Hybrid (Aluminum/Composite)
Protection: Water Resistant
Dimensions: 40.3 x 20.2 x 38.7 mm
Weight: 66 g
Construction: Gear Type: Heavy-Duty Metal
Speed: Speed @6.0V: 0.045 s/60°
Speed @7.4V: 0.032 s/60°
Speed @8.4V: 0.028 s/60°
Torque: Torque @6.0V: 5.0 kg/cm
Torque @7.4V: 7.0 kg/cm
Torque @8.4V: 10.0 kg/cm
Compability: Sanwa SSR
PCB Board: 12-bit
Horn Gear Spline: 25T(Φ6)
Rotating Direction: Counterclockwise (when 1000→2000 μsec)
Max Travel: ~130° (when 900→2100 μsec)
Operating Travel: 100° (when 1000→2000 μsec)
Neutral Position: 1500 μsec
Bearing: 2x Ball Bearings
Potentiometer: Contact Type Variable Resistor
Cable & connector: Cable Diameter: 22 AWG
Cable Length: 300 ±5 mm
Connector: JR Connector
Stall current: Stall Current @6.0V: 6000 mA
Stall Current @7.4V: 7400 mA
Stall Current @8.4V: 8400 mA
Operating current: Operating Current @6.0V: 200 mA
Operating Current @7.4V: 220 mA
Operating Current @8.4V: 250 mA
Idle Current: 5 mA
Dead Band Width: 3-5 μsec
Frequency Range: 50-360 Hz
Control System: Pulse width modification
Operating Temperature: -10°C to 50°C

No vehicle applications recorded.

Sources (4)