SUPER VORTEX GEN2 PRO

Specifications

Nominal Input Voltage

• 3.7V - 7.4V

Total Weight

• 41.7g (w/o power capacitor)

Compatible motor type

• Sensored brushless motors only; sensorless brushless motors are not compatible

BEC

• output: 6.0 V, 3.0 A

Waterproof construction

• Not waterproof

Power capacitor requirement

• The installed power capacitor is required for operation

Motor temperature telemetry

• Requires a motor with a temperature sensor

Motor timing requirement

• Set mechanical motor timing to zero

Transistor current rating, not ESC continuous current

• 1332 A per phase at 25 °C

Dimensions

• 32.0 x 36.8 x 20.5 mm

Minimum sensored motor turns with 2S LiPo

• 4.5T

Power capacitors for low-turn motors

• Use 2 power capacitors in parallel with motors of 5.5T or less

PROGRAM BOX Gen2 firmware requirement

• Version 01.03R001 for the additional programming functions

Included equipment

• 2 power capacitors; 1 sensor cable; 1 cooling duct; 1 cooling fan; 4 fan screws; 1 m of 12 AWG power wire; heat-shrink tubing in 5 colors; 1 manual

SSR response mode

• Supported

Packages

No package details recorded.

Vehicle applications

No vehicle applications recorded.

Search other recorded listings