Optional MULTI SETTING GEAR or M17; CODE10 supports selected servo parameters
SXR mode requirement
M17 firmware 1.01.06 or later, FH5U RF mode and SXR response mode with RX-491
SXR transmitter exclusions
M12S, M12S-RS, EXZES ZZ and MT-44 do not support SXR in this manual
SSL mode requirement with RX-493/RX-491
Use FH5 RF mode; FH5U is not compatible with SSL
SSL battery failsafe compatibility
RX-472, RX-47T and RX-482 require CH1/CH2 for battery failsafe; RX-493/RX-491 support it through SSL with telemetry ON and an appropriate ALERT VOLT threshold
Two-device SSL connection
Use an optional short Y harness for multiple SSL-compatible devices
Default SSL channel
1, steering; select 2 for throttle
CODE10 compatibility boundary
SV-PLUS series is not compatible
CODE/CODE5 programming support
CODE and CODE5 cannot set PGS-CLE parameters
MULTI SETTING GEAR firmware requirement
Load the PGS-CLE-specific firmware before programming
M17 MULTI SETTING GEAR function
M17 firmware 1.01.09 or later
MAX-PW setting at 7.4 V
Use below 80% when using a 7.4 V battery
Servo motor type
Brushless
Construction
Gear material: Full metal gears
Case material: Full aluminum case
Heat sink material
Aluminum
Supported LiPo cell count
2S
Response presets
BASE, QUICK and DRIFT; MULTI SETTING GEAR required to choose preset
