MT12 Surface Radio Controller - 4IN1 / LBT

Specifications

Transmitter MT12: Item

• MT12 Surface Radio

Transmitter MT12: Physical dimensions

• 177.8*118.4*207.8mm

Transmitter MT12: Weight

• 480 grams

Transmitter MT12: Operating frequency

• 2.400GHz-2.480GHz

Transmitter MT12: Internal RF Options

• 4-in-1 multi-protocol / ELRS 2.4GHz

Transmitter MT12: Supported protocols

• Module dependent

Transmitter MT12: Operational current

• 160mA for 4in1 / 320mA for ELRS

Transmitter MT12: Operational voltage

• DC 6.6-8.4V

Transmitter MT12: Operating system

• EdgeTX

Transmitter MT12: Control channels

• 16 as standard, ability for expansion 32 Channels (4in1 only)

Transmitter MT12: Display

• 128*64 Monochrome LCD

Transmitter MT12: Battery

• 2 x 18650 cells or a 2s 7.4v 5000mah battery pack (Batteries not included)

Transmitter MT12: Charging

• Built in USB-C Charging

Transmitter MT12: Firmware Upgrade method

• Via USB or SD card

Transmitter MT12: Wheel and Trigger sensor

• Hall-effect

Transmitter MT12: Module bay

• Nano size (RadioMaster Ranger Nano Module / RadioMaster RM 4in1 module / TBS Crossfire Nano module)

Included receiver R85C: Item

• R85C Receiver

Included receiver R85C: Power supply

• DC 4.5 - 8.4V

Included receiver R85C: Frequency range

• 2400-2483.5Mhz

Included receiver R85C: Support protocol

• D8/D16/SFHSS

Included receiver R85C: Output channel

• 5CH PWM

Included receiver R85C: Antenna type

• high-sensitivity 2.4G antenna

Included receiver R85C: Telemetry power

• 100mw / 20dbm

Included receiver R85C: Weight

• 5.7 grams

Included receiver R85C: Dimensions

• 31.0*18.5*13.0 mm

Manufacturer selected package option

• 4IN1 / LBT

MT12 transmitter USB-C charging chemistry

• Two 3.7 V nominal Li-ion 18650 cells or a 2S 7.4 V LiPo pack; 4.2 V full-charge voltage per cell

MT12 transmitter excluded charging batteries

• Do not use LiFe packs or Li-ion 18650 cells specified as 3.6 V nominal and 4.10 V fully charged

MT12 transmitter Li-ion cell requirements

• Unprotected button-top cells

MT12 4in1 receiver tuning prerequisite

• Some receivers may require frequency tuning using the manufacturer-linked multi-module procedure

MT12 4in1 protocol firmware requirement

• Some newly supported protocols may require a firmware upgrade

Packages

Vehicle applications

No vehicle applications recorded.

Search other recorded listings