RSx4S-Power H.C

Specifications

Torque & speed

• Torque / speed: 31.6Kg・cm スピード：0.11sec/60°（7.4V時）
• Torque / speed: 26.3Kg・cm スピード：0.13sec/60°（6.0V時)
• Torque / speed (manufacturer reference value): 33.0Kg・cm スピード：0.09sec/60°（8.4V時）

Dimensions

• 40.4×37.5×20mm（スタンダードタイプ）

Weight

• 75.2g

Cable & connector

• Cable length: 230mm（コネクタ部除く）

Power supply

• 6.0～7.4V

Published component mode or construction

• シリアル対応

Construction

• Gear material: Hard-anodized aluminum gears

Final gear material

• Reinforced stainless steel

Bearing arrangement

• Dual ball bearings

Gear shaft

• Hard servo gear shaft (manufacturer wording)

Top case material

• Aluminum

Middle case construction

• Aluminum heat-sink middle case

Motor type

• Coreless

HCS support

• Supported

Published serial setup

• EX-NEXT XT mode with servo connected to KR-420XT B/S port

HCS channel setup

• Connect to receiver channel 1-4 configured for HCS mode

Signal mode selection

• Automatic according to receiver port and mode setting; no separate mode-setting accessory required

Parameter programmer

• LCD Expansion Unit 2 EXP-201

EXP-201 programmer power and lead requirement

• Separate 6-7.4 V power supply and Y-lead 2 or 3 required

Model selector requirement

• Servo Model Selector for 4S; legacy No.61029 is not supported

Multiple serial servo IDs

• Each servo ID must be changed when using two serial servos simultaneously

Packages

Vehicle applications

No vehicle applications recorded.

Search other recorded listings