R404SBS (SR/S.Bus2)

Part number01102364-1

Specifications

Dimensions: 1.00×0.81×0.42 Inch
Weight: 5.7 g 0.2 oz
OPERATING VOLTAGE: DC 3.7V-7.4V
Required transmitter system: Futaba F-4G, with transmitter receiver type set to F-4G; not T-FHSS(SR), S-FHSS, FHSS, FASSTest, FASST or T-FHSS Air
Channel output interfaces: Channels1-4 use PWM outputs; channels5-10 use the S.BUS2 port with S.BUS2 servos
SR-enabled channel requirement: Use SR-compatible servos on channels with SR enabled; do not connect normal servos to those channels
S.BUS2 SR-mode servo exclusion: Do not connect a servo already set to SR mode to the S.BUS2 port
Digital/analog servo-mode restrictions: Digital mode must not use analog servos or servos set to SR mode; analog mode must not use servos set to SR mode

No vehicle applications recorded.

Sources (3)